Falcon Hook Lift Model

falcon hookliftmodel
( 0 )

Brand: Falcon

Falcon's hook lift system is designed to enable one truck to carry out different types of work. Falcon’s hooklift model is designed to work with all hook-lift systems. Models are available in a broad range of capacities with the five (5)-ton hopper capacity being the most common.

The Falcon hook lift model asphalt recycler & pre-mix heater hopper holding capacity ranges from 2-tons to 10-tons.

A hooklift system is designed to enable one truck to carry out different types of work. Falcon’s hooklift model is designed to work with all hook-lift systems. Models are available in a broad range of capacities.
All units have three parallel walls (inner, middle and outer). The walls have one piece, seamless steel construction to prevent moisture from wicking into the insulation. When moisture is able to wick into the insulation the insulation sags and the steel rusts. The tops of all three steel layers of the front and rear hopper walls are angled to create a 2″ slope. This 2″ slope allows water to drain off the top of the material loading doors. The complete area between middle and outer walls is filled with insulation. The top of hopper walls are secured to one another with 12-gauge steel capping channel and the side hopper walls are secured to one another with 12-gauge steel corner molding. Capping channel and corner molding add structural strength to the hopper preventing it from becoming out of square over time. Sheet-metal to sheet-metal construction where hopper wall corners are butt-welded together without capping channel or corner molding lack the structural integrity required to maintain a square hopper.

Vote: ( 0 )

Give your advice about this item:

Username:
E-mail:

Related products

Additional information

Falcon 1-5 Ton Hot Patchers
( 5 )

Falcon Trailer Model Hotbox
( 0 )

Falcon Dump Box Model Hotbox
( 24 )

Falcon Slip In Model
( 7 )

Results 1 - 4 of 4