10 Gauge steel moldboard.

Break formed for added strength.

1/4” thick keeper plate. Compression trip moldboard design.

Adjustable moldboard attack angle.

1/4” Thick moldboard ribs.

1/2” Thick base angle.

15” Intake tapered to 40” discharge height.

AASHO standard cutting edge.

1” Dia. pin holes on 30-1/2” centers.

Reversible pushframe up 32° to either side of bulldoze position

Twin 3” bore by 12” double acting reverse cylinders.

Models Available:
OWRL108S1540CT = 108” Length
OWRL114S1540CT = 114” Length

Weights = 885 lbs. and 985 lbs.

OWSK Series
One Way Trip Moldboard Plows

Heavy duty tubular sector

Attack angle position tube

Adjustable cast runner shoes

Standard 1/2” X 8” C-1085 blade

Oscillator bar that adjusts plow articulation to road contour

Standard hitch pin spacing

Heavy duty lift chains

High strength low weight design

Two compression trip spring assemblies

9’ Cleared plowing path.

Trip edge design with four torsion springs.

Adjustable moldboard attack angle.

Standard 1/2” by 8” wide cutting edge.

Heavy duty base angle punched on 8” and 12” centers.

Available with hydraulic ram or manual reverse pushframe.

10 Gauge break formed moldboard skinplate.

Six 1/2” x 3-1/2” wide moldboard ribs.

Oscillating brive bar with pinning ears on 30-1/2” centers.