10 GA HT floor w/ 2" radius

10 GA HT head sheet

10 GA HT 3 panel gate

10 GA HT side w/ integral boxed top rail

Front corner post & 2 vertical side braces

Full depth 3/16" HT rear post

Full width rear bolster

Tarp friendly top hardware

Overshod bottom hardware

Available with drop or fixed sides

8 GA HT floor w/ 2" radius

10 GA HT head sheet, side sheet

Boxed top rail, 3 vertical side braces

Full depth 8 GA HT rear post

Full width 3/16" HT rear bolster

Tarp friendly top hardware

Full width rear bolster

Tarp friendly top hardware

Overshod bottom hardware

1/4" 400 BHN floor side w/ 33" radius

1/4" 400 BHN head sheet

1/4" 400 BHN 2 panel gate

Hi-rise gate (twin air cylinder operated)

Dirt shedding boxed top rail

Full depth 1/4" HT rear post

Full width 6" channel rear bolster

Front inverted trunion design

No cylinder housing inside head sheet

1/4" 5083-H321 floor sheet

3/16" 5454-H34 front, sides, gate sheet

4" x 10" @ 5.4/ft extruded top roll

12" full height front post

9" x 4" @ 4.4/ft extruded rear post

Extruded rubrail

1" rubber tailgate cushion

4" x 4" @ 5.6/ft extruded gate perimeter braces

Steel & composite greaseless bushings

In tailgate hinge & tailgate gussets

7" @ 5.8/ft extruded longsills

Extruded cavity to hold 1" rubber wear

Strip without adhesive 3 1/2 x 4" @ 2.7/ft extruded box channel

X-members on 12" centers 12" @ 7.1/ft extruded rear bolster

402AU setup for class 40/50/60 underbody hoists

502AF setup for class 90/120 front telescopic hoists